How Long Does a Ninja Blender Take to Charge?

By Boxofin Editorial Team • 26 October 2026

The original Ninja Blast takes about 2 hours to charge fully, and the Ninja Blast Max can take up to 3 hours. Those are Ninja’s own figures, and they matter more than most owners expect, because a flat battery means no smoothie.

Quick answer

Charge the Ninja Blast for about 2 hours and the Blast Max for up to 3 hours, using the supplied USB-C cable. Ninja does not publish a charge time for one blend. A full charge covers several short blend cycles.

  • Best for BC100/BC150 owners: plan on 2 hours
  • Best for BC200/BC250 owners: plan on up to 3 hours
Key Takeaways
  • Ninja Blast: about 2 hours. Ninja Blast Max: up to 3 hours.
  • Use a 5V/3A power supply for the original Blast.
  • The battery does not charge while the blades are running.
  • Real battery life depends on ice, frozen fruit, and blend length.
  • On the Blast Max, a flashing green light means charging. Solid green means full.

How long does the Ninja Blast take to fully charge?

The BC100/BC150 Ninja Blast takes approximately 2 hours, according to Ninja’s Blast FAQ. The owner’s manual also tells you to charge for at least 2 hours to get a full battery.

Comparison table of the Ninja Blast and Ninja Blast Max showing full charge time, charging method, charging during a blend, and status light.

The Blast Max is slower. Ninja says the BC200/BC250 can take up to 3 hours, per its Blast Max FAQ. Many pages quote one number for both. They are not the same.

FeatureNinja Blast (BC100/BC150)Ninja Blast Max (BC200/BC250)
Full charge timeAbout 2 hoursUp to 3 hours
Charging methodUSB-C port on back of motor base, 5V/3A supplySupplied Ninja charging cable
During a blend cycleDoes not chargeDoes not charge
Status lightSee manualFlashing green, then solid green

Expert Insight: Charge a new unit for the full time before first use. The manual calls for at least 2 hours on the Blast.

How long does a Ninja blender take to charge for one blend?

Ninja does not publish a charge time for exactly one blend. The 2-hour and 3-hour figures are for a full battery, not a single smoothie.

You can still make a rough plan. In a Food Network review, the Blast ran seven full 30-second cycles before the battery read low, then two more before it died. That is nine cycles from one charge.

Divide the 2-hour charge by nine cycles: 120 minutes ÷ 9 is about 13 minutes of charging per cycle. Treat that as a planning estimate only. It is not an official figure, and charging may not be perfectly even across the battery.

How many smoothies can a full charge make?

Expect several short cycles, but the number varies. Ice, frozen fruit, long blends, and the model all change it. The Food Network count of nine is one data point, not a promise.

Worked example: one smoothie a day

Say you make one smoothie daily and each takes one 30-second cycle. Using the nine-cycle result, one 2-hour charge could last well over a week. Now add heavy ice and a second cycle for each drink. That could drop you to a few days. Charge on a fixed night, such as every Sunday, and top up before travel.

portable blender with a smoothie on a kitchen counter next to a phone charger cable

What charger and power supply does the Ninja Blast require?

Ninja specifies a 5V/3A power supply for the original Blast. Plug the USB-C cable into the charging port on the back of the motor base. The Blast Max uses the supplied Ninja charging cable.

A weak phone brick or a cheap cable may charge slowly or not at all. Use what came in the box where you can.

How can I tell when the Ninja blender is fully charged?

On the Blast Max, the indicator flashes green while charging and turns solid green when full. Those are the patterns Ninja confirms.

  • Charging: flashing green (Blast Max)
  • Fully charged: solid green (Blast Max)
  • Low battery or charging error: check the light pattern in your model’s manual, since I have no confirmed pattern to share

Can I use a Ninja Blast while it is charging?

Ninja says the original Blast can be used while plugged in. It will not charge during a blend cycle, though. Charging picks up again once the blades stop.

That also answers a common question: does the blender charge during a blend cycle? No. A plugged-in blend drains no extra charge into the battery, so it is no shortcut to a full battery.

What should I do if my Ninja Blast is not charging?

  • No light or no charge? Push the USB-C plug fully into the port on the back of the base.
  • Slow charging? Switch to a 5V/3A power supply and the supplied cable.
  • Still stuck? Try another outlet and cable, and make sure the blender is not mid-blend.
  • Nothing helps? Contact Ninja support.
Note on Scope: This guide covers the Ninja Blast and Blast Max. It does not cover other Ninja cordless products.

What do owners say?

Owners like

  • Cordless operation for smoothies and protein shakes away from a wall outlet
  • USB-C charging that suits travel and everyday use
  • A full charge that supports multiple short blending cycles
  • Portable size and the integrated carry handle

Common complaints

  • Battery life varies with frozen ingredients, ice, and repeated cycles
  • Some expect faster charging than the roughly 2-hour full-charge time
  • The battery cannot refill during an active blend cycle
  • Charging problems when the wrong cable or power supply is used

Summarised from owner reviews and long-term user reports; individual experiences vary.

Frequently Asked Questions

How long does ninja blender take to charge?

The Ninja Blast takes about 2 hours. The Blast Max can take up to 3 hours. Both figures come from Ninja.

How long does ninja blender take to charge for one blend?

Ninja gives no official time for one blend. As a rough estimate, a 2-hour charge spread over nine reported cycles works out to about 13 minutes per cycle. Real results vary.

How long do ninja blenders take to charge?

Plan on 2 hours for the original Blast and up to 3 hours for the Blast Max. Charge for the full time before first use, and use the supplied USB-C cable.

Boxofin Editorial Team

Boxofin Editorial Team

The Boxofin Editorial Team researches home and kitchen appliances using manufacturer specifications, ENERGY STAR and DOE efficiency data, AHAM ratings, safety recalls and patterns in verified owner reviews. We focus on noise, running cost, reliability and everyday ease of use. How we work: https://boxofin.com/editorial-policy/

Shopping for another appliance?

Browse our plain-English buying guides for the kitchen, cleaning and home comfort.

More Blenders guides